Mts Model FlexTest SE Manual do Utilizador descarregar pdf (Página 55)

Connecting Electrical Power

Models FlexTest® IIm/GT/SE Controller Hardware Installation

Power All equipment related to the chassis should be connected on the same fused

power circuit.

• The power supply can accept single-phase voltages within 90–264 V AC at

frequencies between 47–63 Hz.

• The maximum continuous power usage is approximately 300 W. The

current draw depends on the local voltage supply. A 15 amp line will be

adequate for the chassis and the computer.

• The power supply automatically selects the proper voltage range and line

frequency.

• The power supply is protected with an external circuit breaker in the On/Off

switch that trips at a 5 amp overload. An internal fuse in the power supply is

not user accessible or repairable.

AC power disconnect Turn off the AC power switch. Remove the AC power cord from the unit. This

will remove all AC power from the Model 493.02 Chassis.

1 2 ... 50 51 52 53 54 55 56 57 58 59 60 ... 263 264

Sem comentários

Mts Model FlexTest SE Manual do Utilizador Página 55