Mts Model FlexTest SE Manual do Utilizador descarregar pdf (Página 50)

Models FlexTest® IIm/GT/SE Controller Hardware

VMEbus Modules

Installation

VMEbus Modules

The VMEbus compatible modules should be installed in chassis slots according

to the following guidelines.

• The processor module is installed in slot 1

• The I/O carrier module is installed in slot 2.

• The System I/O module is installed in slots 4 and 5.

VMEbus Modules

LOT MODULE NAME FUNCTION

Slot 1 Processor Provides PIDF processing for the Controller and

management of the other plug-in modules in the standalone

configuration. Provides an interface between the Controller

and an external computer in the automated configuration.

Slot 2 Model 493. 40 I/O Carrier Supports up to four mezzanine cards that can be used for

sensor conditioning, driving a servovalve, and in the

automated configuration, providing A/D and/or D/A channels.

Slot 3 Blank in standard

configurations.

May be used for additional

Model 493.40 I/O Carrier

(factory installed option for

automated systems)

Additional carrier chassis that can house up to four

mezzanine cards for expanded sensor conditioning and A/D

and D/A channels

Note This is not a standard option. It is available only for

automated systems and must be configured at the

factory. For more information, contact MTS.

Slots 4, 5 Model 493.42 System I/O Provides box-in and box-out connections for daisy chaining

multiple Controllers, analog and digital I/O, E-Stop, and HSM

and HPU control.

TYPE E PC-MIP

RUN 6TS BFL

ABT RST

DEBUG

PCI MEZZAN NE CARD

Placement of

VMEbus modules

in the chassis

1 2 ... 45 46 47 48 49 50 51 52 53 54 55 ... 263 264

Sem comentários

Mts Model FlexTest SE Manual do Utilizador Página 50