Mts Landmark Testing Systems Manual do Utilizador descarregar pdf (Página 22)

Landmark Test System Site Prep Guide

Controller Specifications

System Component Specifications

Controller Specifications

Environmental Requirements—Series 494 Hardware

All Series 494 hardware components are intended for indoor use only. This

indoor environment must conform to the following environmental specifications.

Note All Series 494 Controller must only be operated under the installation

and ambient conditions (such as, temperature, moisture, and EMC)

specified.

Note To maintain EMC compliance, the controller must be installed in a

location that does not exceed the EN 61000-6-4 emission standard for

industrial environments.

Parameter Specification

Temperature 5ºC–40ºC (41ºF–104ºF)

Humidity 5–85%, non-condensing

Altitude 3048 m (10,000 ft) maximum

Space

Requirements

For proper ventilation, allow 51 mm (2 in) clearance

on all sides of the chassis.

The rear of the chassis requires a minimum

clearance of 15.24 cm (6 in) for cable connections.

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 33 34

Sem comentários

Mts Landmark Testing Systems Manual do Utilizador Página 22