Mts Series 609 Alignment Fixture Manual do Utilizador descarregar pdf (Página 25)

Series 609 Alignment Fixture Product Information Installation

For the jackbolts, lightly lubricate the preload collar and its washer

with Molykote G-n paste. Remove the jackbolts and lightly lubricate

them. Reinstall the jackbolts so that they are flush with the bottom of

the collar.

For the preload nut, lubricate the washer and adapter bushing.

B. Screw the mounting stud into the top of the force transducer. A

styrofoam bead will make future stud removal easier. Do not screw the

stud all the way into the force transducer.

C. Remove grease from the surfaces of where the alignment fixture will

contact the crosshead and force transducer. Use a cleaner that leaves no

residue (like acetone).

D. Install the alignment fixture on the force transducer’s mounting stud.

Ensure that the 0° mark faces the front of the load unit.

Lubricate

Styrofoam Bead

1 2 ... 20 21 22 23 24 25 26 27 28 29 30 ... 69 70

Sem comentários

Mts Series 609 Alignment Fixture Manual do Utilizador Página 25