Mts Model 409.83 Temperature Controller Manual do Utilizador descarregar pdf (Página 33)

Selecting an Access Level

Model 409.83 Temperature Controller Operation

• Allows viewing and editing of parameters defined in the Edit level.

• Full Level

• Allows viewing and editing of all parameters.

• Edit Level

• Allows you to set which parameters are accessible in the Operator

level.

• Configuration Level

• Allows you to set up the fundamental characteristics of the controller.

Full, Edit, and Configuration levels are password-protected to prevent

unauthorized access.

Selecting an Access Level

To select an access level:

1. From the Home display, press the page button until you see the ACCS list

header.

2. Press the scroll button.

The display will read CODE. Enter the password using the up and down

keys (the password is set to 1 when the unit is shipped from the factory).

Once the correct password is entered, the lower display will read PASS,

indicating that the access level is unlocked.

Note Refer to the Eurotherm Model 2216 Temperature Controller manual for

information on changing passwords.

3. Press the scroll button to proceed to the GOTO display.

4. From the GOTO display, press the up or down arrows to select the desired

access level.

There are four access levels available:

• OPER Operator level

• FULL Full level

• EDIT Edit level

• CONF Configuration level

Editing the

operator access

In the edit access level, you can set which parameters are accessible in the

Operator access level and/or accessible from the Home display. To set operator

access to a parameter:

1. Select the Edit level.

2. Select the parameter to be set by toggling through the list headers (page

button) and selecting the parameter (scroll button).

1 2 ... 28 29 30 31 32 33 34 35 36 37 38 39 40

Sem comentários

Mts Model 409.83 Temperature Controller Manual do Utilizador Página 33