Mts Criterion 40 - Lifting and Moving Instructions Manual do Utilizador descarregar pdf (Página 14)

Moving C43 (30 kN, 50 kN) and C44 Frames

MTS Criterion

Series 40 Lifting and Moving Instructions

Moving C43 (30 kN, 50 kN) and C44 Frames

C43 (30 kN, 50 kN) and C44 double-column MTS Criterion load frames should

only be moved using a forklift (or crane) with a load rating that is double the load

frame’s gross weight. For frame weights, see “Load Frame Dimensions and

Weights” on page 7.

The MTS Criterion frames are heavy.

Moving the frame using improper procedures can injure personnel (for

example, strained muscles and back injuries) or damage the frame.

Moving and positioning the MTS Criterion frame must be performed by

personnel trained in moving large equipment.

Before you begin Before moving the load frame, ensure that:

• Your equipment operators have the appropriate licenses and have complied

with your local safety standards (for example, the appropriate training

required by OSHA in the U.S.).

• At the final site location, there is adequate clearance between the ceiling and

the top of the load frame, including clearance for lifting the frame via a

forklift or crane.

• There are no loose accessories on the shipping skid.

• The frame and forklift (or crane) can fit through all doorways, halls,

elevators, or stairs located from the shipping dock to the final site location.

• The floors from the shipping dock to the final site location have sufficient

support for the weight of the load frame and forklift (or crane) combined.

• You have adequate packaging materials to protect the load frame when

moving or relocating it to another site.

Equipment The following items are required by the customer:

• A forklift or crane with a load rating that is double the load frame’s gross

weight (for frame weights, see “Load Frame Dimensions and Weights” on

page 7)

• Protective padding for the crosshead

• Screw removal tool

• Safety line or safety belt

• Two M16 hoist rings if using a crane

Righting the package

from a prone position

The C43.504 and C44 frames have been shipped in a horizontal position; they

must be moved into an upright, standing position before unpacking.

WARNING

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 20 21 22

Sem comentários

Mts Criterion 40 - Lifting and Moving Instructions Manual do Utilizador Página 14