Mts Acumen Electrodynamic Test Area Enclosure Manual do Utilizador descarregar pdf (Página 11)

Test Area Enclosure

DescriptionItem

Rear panel assembly1

M6 x 1 mm x 35 mm socket low head screw2

Top bracket3

M6 x 1.00 mm x 12 mm buttonhead cap screw4

M6 x 25MM x 12 mm flathead screw5

Left side panel assembly6

Foot mount7

M5 X 35MM socket head screw, M5 butt fastener8

M5 C'Bore butt fastener9

Foot mount10

Right side panel assembly11

Front door assembly12

1. Raise the crosshead.

2. Put two foot mounts (items 7 and 10) on the frame in the provided machined indents.

3. Put a M6 x 1.00 mm x 12mm buttonhead cap screw (item 4) for the top bracket on the baseplate.

Once the side panel is in place and before you tighten down the bottom screws, it makes installation easier

to secure the top side panel bracket to the frame to help hold the side panel in position while you tighten

the bottom screws to secure the side pane to the frame base. This step puts the top bracket screw where

you can reach it when the time comes.

MTS Acumen™ Electrodynamic Test System 11

Test Area Enclosure Installation

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 17 18

Sem comentários

Mts Acumen Electrodynamic Test Area Enclosure Manual do Utilizador Página 11